Miscellaneous Rail Products

Low Profile Rail End Cap

Shaped to match the top of Koller Low Profile and “T” Bolt rails, the Koller Low Profile Rail End Cap provides an aesthetic appearance, whilst also protecting the ends of rails. A channel is provided to aid rail cleaning and pre-drilled to aid fixing.

Code	Description	Low Profile Rail	'T' Bolt Rail
KFP0018	Low Profile End Cap

Surface Rail End Cap

Shaped to match Koller Surface Rail, the Koller Surface Rail End Cap provides an aesthetic appearance, whilst also protecting the ends of rails. A channel is provided to aid rail cleaning and pre-drilled to aid fixing.

Code	Description	Surface Rail
KFP0048	Surface Rail End Cap

Spreader Plate

Koller Spreader Plates (zinc plated) for use where it is difficult to fit standard washers under the vehicle floor when fitting rail. Supplied pre-drilled for M8 fixings. Not to be used as a substitute for floor strengthening.

Code	Description	Surface Rail	Low Profile Rail	'T' Bolt Rail
KFP0036	Spreader Plate M8

Rubber Rail Cover Strip

Koller Rubber Rail Cover Strip prevents dirt and grit entering rails by covering the holes and channel in the top of the rails. Time between cleaning the rails is therefore significantly increased. Simply push in from the top. Cut to the required length. Supplied in 1 metre continuous lengths up to 25 metres.

Code	Description	Surface Rail	Low Profile Rail	'T' Bolt Rail
KFP0054	Rubber Rail Cover Strip (per metre)

Rubber Rail Insert

Koller Rubber Rail Insert prevents dirt and grit entering rails by covering the holes in the top of the rails. Time between cleaning the rails is therefore significantly increased. Simply push in from the top. Sits flush with the surface of rails. Available in 305mm (12”) lengths.

Code	Description	Surface Rail	Low Profile Rail	'T' Bolt Rail
KFP0017	Rubber Rail Insert (305mm, 12")